This article reviews various Additive Manufacturing (AM) techniques, including Stereolithography (SLA), Three-Dimensional Printing (3DP), Fused Deposition Modeling (FDM), and Selective Laser Sintering (SLS), for the fabrication of tissue engineering scaffolds. It discusses the advantages and limitations of each method while highlighting recent advancements in their development. The study emphasizes the capability of 3DP to fabricate complex structures with intricate internal geometries and channels, including those involving temperature-sensitive materials. SLA is noted for its high resolution and ability to process multi-resin models, whereas FDM is recognized for its cost-effectiveness and suitability for polymer-based applications. Furthermore, emerging research on SLS and bioprinting techniques is explored, particularly their potential to fabricate scaffolds with direct cell integration and enhanced flexibility. Overall, the article provides a comprehensive overview of current challenges and future prospects of AM technologies in advancing tissue engineering applications.
J. Salgado et al., “Tissue Engineering and Regenerative Medicine,” Tissue Engineering of the Peripheral Nerve: Stem Cells and Regeneration Promoting Factors, pp. 1–33, 2013, doi: 10.1016/b978-0-12-410499-0.00001-0.
Mostafaei et al., “Binder jet 3D printing—Process parameters, materials, properties, modeling, and challenges,” Progress in Materials Science, vol. 119, p. 100707, Jun. 2021, doi: 10.1016/j.pmatsci.2020.100707.
S. C. Cox, J. A. Thornby, G. J. Gibbons, M. A. Williams, and K. K. Mallick, “3D printing of porous hydroxyapatite scaffolds intended for use in bone tissue engineering applications,” Materials Science and Engineering: C, vol. 47, pp. 237–247, Feb. 2015, doi: 10.1016/j.msec.2014.11.024.
J. Ravoor, M. Thangavel, and R. Elsen S, “Comprehensive Review on Design and Manufacturing of Bio-scaffolds for Bone Reconstruction,” ACS Applied Bio Materials, vol. 4, no. 12, pp. 8129–8158, Nov. 2021, doi: 10.1021/acsabm.1c00949.
S. C. Daminabo, S. Goel, S. A. Grammatikos, H. Y. Nezhad, and V. K. Thakur, “Fused deposition modeling-based additive manufacturing (3D printing): techniques for polymer material systems,” Materials Today Chemistry, vol. 16, p. 100248, Jun. 2020, doi: 10.1016/j.mtchem.2020.100248.
Yadav et al., “Fused filament fabrication: A state-of-the-art review of the technology, materials, properties and defects,” International Journal on Interactive Design and Manufacturing (IJIDeM), vol. 17, no. 6, pp. 2867–2889, Aug. 2022, doi: 10.1007/s12008-022-01026-5.
D. Espalin, D. W. Muse, E. MacDonald, and R. B. Wicker, “3D Printing multifunctionality: structures with electronics,” The International Journal of Advanced Manufacturing Technology, vol. 72, no. 5–8, pp. 963–978, Mar. 2014, doi: 10.1007/s00170-014-5717-7.
S. Bhagia et al., “Critical review of FDM 3D printing of PLA biocomposites filled with biomass resources, characterization, biodegradability, upcycling and opportunities for biorefineries,” Applied Materials Today, vol. 24, p. 101078, Sep. 2021, doi: 10.1016/j.apmt.2021.101078.
Chua Chee Kai, “Three-dimensional rapid prototyping technologies and key development areas,” Computing & Control Engineering Journal, vol. 5, no. 4, pp. 200–206, Aug. 1994, doi: 10.1049/cce:19940407.
Alamdari, J. Lee, M. Kim, Md. O. F. Emon, A. Dhinojwala, and J.-W. Choi, “Effects of Surface Energy Reducing Agents on Adhesion Force in Liquid Bridge Micro stereolithography,” Additive Manufacturing, vol. 36, p. 101522, Dec. 2020, doi: 10.1016/j.addma.2020.101522.
F. Li, S. C. Thickett, F. Maya, E. H. Doeven, R. M. Guijt, and M. C. Breadmore, “Rapid Additive Manufacturing of 3D Geometric Structures via Dual-Wavelength Polymerization,” ACS Macro Letters, vol. 9, no. 10, pp. 1409–1414, Sep. 2020, doi: 10.1021/acsmacrolett.0c00465.
D. J. A. Cameron and M. P. Shaver, “Aliphatic polyester polymer stars: synthesis, properties and applications in biomedicine and nanotechnology,” Chem. Soc. Rev., vol. 40, no. 3, pp. 1761–1776, 2011, doi: 10.1039/c0cs00091d.
K. Arcaute, B. Mann, and R. Wicker, “Stereolithography of spatially controlled multi-material bioactive poly (ethylene glycol) scaffolds,” Acta Biomaterialia, vol. 6, no. 3, pp. 1047–1054, Mar. 2010, doi: 10.1016/j.actbio.2009.08.017.
J. W. Lee, K. Kim, K. S. Kang, S. Chen, J. Rhie, and D. Cho, “Development of a bone reconstruction technique using a solid free‐form fabrication (SFF)‐based drug releasing scaffold and adipose‐derived stem cells,” Journal of Biomedical Materials Research Part A, vol. 101A, no. 7, pp. 1865–1875, Nov. 2012, doi: 10.1002/jbm.a.34485.
J. Kort-Mascort et al., “Decellularized Extracellular Matrix Composite Hydrogel Bioinks for the Development of 3D Bioprinted Head and Neck in Vitro Tumor Models,” ACS Biomaterials Science & Engineering, vol. 7, no. 11, pp. 5288–5300, Oct. 2021, doi: 10.1021/acsbiomaterials.1c00812.
H. Jang, Y. Koo, and G. Kim, “ASC/chondrocyte-laden alginate hydrogel/PCL hybrid scaffold fabricated using 3D printing for auricle regeneration,” Carbohydrate Polymers, vol. 248, p. 116776, Nov. 2020, doi: 10.1016/j.carbpol.2020.116776.
CRediT Author Statement
The author reviewed the results and approved the final version of the manuscript.
Acknowledgements
We would like to thank Reviewers for taking the time and effort necessary to review the manuscript. We sincerely appreciate all valuable comments and suggestions, which helped us to improve the quality of the manuscript.
Funding
No funding was received to assist with the preparation of this manuscript.
Ethics declarations
Conflict of interest
The authors have no conflicts of interest to declare that are relevant to the content of this article.
Availability of data and materials
Data sharing is not applicable to this article as no new data were created or analysed in this study.
Author information
Contributions
All authors have equal contribution in the paper and all authors have read and agreed to the published version of the manuscript.
Corresponding author
Wei Zhang
Department of Mechanical, Tsinghua University, Haidian District, Beijing 100084, China.
Open Access This article is licensed under a Creative Commons Attribution NoDerivs is a more restrictive license. It allows you to redistribute the material commercially or non-commercially but the user cannot make any changes whatsoever to the original, i.e. no derivatives of the original work. To view a copy of this license, visit https://creativecommons.org/licenses/by-nc-nd/4.0/
Cite this article
Wei Zhang, “Recent Advances in 3D Printing Technologies for Scaffold Fabrication and Bioprinting”, Journal of Machine and Computing, vol.6, no.2, pp. 435-443, 2026, doi: 10.53759/7669/jmc202606033.
