#

Advances in Computational Intelligence in Materials Science

Book Series

About the Book
About the Author
Table of Contents

Buy this Book

eBook
  • • Included format: Online and PDF
  • • eBooks can be used on all reading devices
  • • ISSN : 2960-2408
  • • ISBN : 978-9914-9946-6-7

Hand Cover
  • • Including format: Hardcover
  • • Shipping Available for individuals worldwide
  • • ISSN : 2960-2394
  • • ISBN : 978-9914-9946-7-4

Services for the Book

Download Product Flyer
Download High-Resolutions Cover

1st International Conference on Emerging Trends in Mechanical Sciences for Sustainable Technologies

Friction Surfacing of Mild Steel: A Review

Ramakrishnan T, Vinodh S, Naveen Kumar V, Dusendiran S and Vishnuvarthan T, Department of Mechanical Engineering, Sri Eshwar College of Engineering, Coimbatore, Tamil Nadu, India.

Online First : 07 June 2023
Publisher Name : AnaPub Publications, Kenya.
ISSN (Online) : 2960-2408
ISSN (Print) (Online) : 2960-2394
ISBN (Online) : 978-9914-9946-6-7
ISBN (Print) : 978-9914-9946-7-4
Pages : 109-118

DOI
https://doi.org/10.53759/acims/978-9914-9946-6-7_14
Article Views

Abstract

Friction coating processis a solid state metal deposition process which is developed from friction stir welding technique. Mild steel is a low-carbon steel that is commonly used in the construction industry due to its low cost, ease of manufacturing, and excellent mechanical properties. However, its low hardness and poor wear resistance limit its usage in several applications. Frictional metal coating technique is used tocoat mild steel with a variety of consumable materials including steel, aluminium, copper, nickel, titanium, etc.,These coatings have been shown to greatly increase the wear, corrosive and thermal resistance of mild steel.This review shows investigations dealing with few dissimilar consumable rods deposited on the surface of mild steel substrate to enhance the surface property and also used for crack repair, dissimilar material joinsand hole or gap filling applications.The potential future directions for the development and use of this technique are also presented.

Keywords

Friction Surfacing, Mild Steel, Viscoplastic State, Adherence, Microstructure, Heat Affected Zone.

  1. Kumar, B. V., Reddy, G. M., & Mohandas, T. (2015). Influence of process parameters on physical dimensions of AA6063 aluminium alloy coating on mild steel in friction surfacing. Defence Technology, 11(3), 275-281.
  2. H. Li, W. Qin, A. Galloway, and A. Toumpis, “Friction Surfacing of Aluminium Alloy 5083 on DH36 Steel Plate,” Metals, vol. 9, no. 4, p. 479, Apr. 2019, doi: 10.3390/met9040479.
  3. R. George Sahaya Nixon, B. S. Mohanty, and R. Sathish, “Friction surfacing of AISI 316 over mild steel: A characteriation study,” Defence Technology, vol. 14, no. 4, pp. 306–312, Aug. 2018, doi: 10.1016/j.dt.2018.03.003.
  4. R. Kumar et al., “Characterization of Friction Surfaced Coatings of AISI 316 Tool over High-Speed-Steel Substrate,” Transactions of FAMENA, vol. 41, no. 2, pp. 61–76, Jul. 2017, doi: 10.21278/tof.41206.
  5. K. H. S. Silva, P. P. Brito, I. B. Santos, M. A. Câmara, and A. M. Abrão, “The behaviour of AISI 4340 steel coatings on low carbon steel substrate produced by friction surfacing,” Surface and Coatings Technology, vol. 399, p. 126170, Oct. 2020, doi: 10.1016/j.surfcoat.2020.126170.
  6. J. Gandra, R. M. Miranda, and P. Vilaça, “Performance analysis of friction surfacing,” Journal of Materials Processing Technology, vol. 212, no. 8, pp. 1676–1686, Aug. 2012, doi: 10.1016/j.jmatprotec.2012.03.013.
  7. F. D. Troysi and P. P. Brito, “Development and characterization of an iron aluminide coating on mild steel substrate obtained by friction surfacing and heat treatment,” The International Journal of Advanced Manufacturing Technology, vol. 111, no. 9–10, pp. 2569–2576, Oct. 2020, doi: 10.1007/s00170-020-06310-w.
  8. Abdollah-zadeh, A. Akhbarizadeh, and M. H. Enayati, “Friction surfacing of aluminum alloy on steel substrate: effect of process parameters on the metallurgical bonding”, Journal of Manufacturing Processes, vol. 26, pp. 132-139, (2017).
  9. T. Jujare, A. Kumar, S. V. Kailas, and K. U. Bhat, “Friction Surfacing of Mild Steel by Copper: A Feasibility Study,” Procedia Materials Science, vol. 5, pp. 1300–1307, 2014, doi: 10.1016/j.mspro.2014.07.445.
  10. Chen, H., Jiang, Z., Gao, X., Wang, H., Zhao, X., & Chen, C, “Tribological behavior of a nickel-based coating deposited on mild steel using friction surfacing Wear”, 332, 1125-1133, (2015).
  11. Li, J., Liu, Y., & Huang, C, “Microstructure and mechanical properties of Al-Cu deposited layers on mild steel by friction surfacing”, Materials Science and Engineering: A, 696, 198-207, (2017).
  12. Li, Y., Zhou, S., & Hu, S, “Corrosion resistance and bonding strength of a NiCrSiB coating on mild steel by friction surfacing”, Materials and Corrosion, 70(7), 1289-1297, (2019).
  13. Mujahid, M., Hussain, S. Z., & Khan, Z. A, “Improvement of corrosion resistance of mild steel by using friction surfacing technique”, Journal of Materials Research and Technology, 7(4), 415, (2018).
  14. R. Damodaram, P. Rai, S. Cyril Joseph Daniel, R. Bauri, and D. Yadav, “Friction surfacing: A tool for surface crack repair,” Surface and Coatings Technology, vol. 422, p. 127482, Sep. 2021, doi: 10.1016/j.surfcoat.2021.127482.
  15. Qian.L et al., "Effect of heat input on microstructure and mechanical properties of friction stir welded AZ31 magnesium alloy," Materials Science and Engineering: A, vol. 679, pp. 163-172., 2017.
  16. E. Seidi, S. F. Miller, and B. E. Carlson, “Friction Surfacing Deposition by Consumable Tools,” Journal of Manufacturing Science and Engineering, vol. 143, no. 12, Jun. 2021, doi: 10.1115/1.4050924.
  17. Bhattacharya, S., Kumar, P., & Kumar, S, “Microstructure and mechanical properties of copper-tin coating on mild steel substrate by friction surfacing”, Surface and Coatings Technology, 403, 126435, (2020).
  18. Chen, L., Xu, C., Cai, H., & Zhang, L, “Effect of coating thickness on the wear resistance of copper-nickel coating on mild steel produced by friction surfacing”, Journal of Materials Engineering and Performance, 27(8), 4052-4060, (2018).
  19. J. Gandra, D. Pereira, R. M. Miranda, and P. Vilaça, “Influence of Process Parameters in the Friction Surfacing of AA 6082-T6 over AA 2024-T3,” Procedia CIRP, vol. 7, pp. 341–346, 2013, doi: 10.1016/j.procir.2013.05.058.
  20. Yarita, T., Nakamura, Y., Kitajima, Y., & Kikuchi, M, “Characterization of steel-based coatings formed by friction surfacing. Surface and Coatings Technology”, 371, 153-159, (2019).
  21. Alak.A et al, “Investigation of the Microstructure and Mechanical Properties of Friction Surfaced Al-Mg Alloy on Mild Steel. Materials Research Proceedings”, 18, 222-227, (2020).
  22. Al-Fadhalah S. A. et al, “Characterization of Microstructure and Mechanical Properties of Friction Surfaced Al-7075 on Mild Steel. Materials Today: Proceedings”, 34, 1035-1040, (2020).
  23. Faraji and M.Torkamany, "Microstructure and Mechanical Properties of Friction Surfaced AISI 304 Stainless Steel," Journal of Materials Science and Technology, vol. 31, no. 3, pp. 301-308, (Mar.2015).
  24. Prasanna, V. K., and BalusamyV, “Study on the Effect of Friction Surfacing on the Microstructure and Mechanical Properties of Mild Steel,” In IOP Conference Series: Materials Science and Engineering, IOP Publishing, Vol. 905, No. 1, p. 012072, 2020.
  25. Sathiskumar, C., Raja, G., and Naveen, J, “Optimization of Process Parameters for Friction Surfacing of AISI 316L Stainless Steel on AISI 1018 Mild Steel Using Response Surface Methodology,” Journal of Materials Research and Technology, Vol.9, no.3, 4493-4503, 2020.

Cite this article

Ramakrishnan T, Vinodh S, Naveen Kumar V, Dusendiran S and Vishnuvarthan T, “Friction Surfacing of Mild Steel: A Review”, Advances in Computational Intelligence in Materials Science, pp. 109-118, June. 2023. doi:10.53759/acims/978-9914-9946-6-7_14

Copyright

© 2023 Ramakrishnan T, Vinodh S, Naveen Kumar V, Dusendiran S and Vishnuvarthan T. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.

                           

Copyright © Design by AnaPub Publications