The paper objective is to outline our effort to decrease violations and increase driver safety. Alcohol sensor and an Arduino board were combined to create this project. The Arduino ATmega328 processor is capable of carrying out more operations than conventional microcontrollers. Using a sensor for alcohol Identification of the presence of alcohol in human breath is the aim of this study, MQ3. The sensor may be used with any vehicle and is easy to hide from suspects because its precise sensitivity range is only a few metres. This project is installed anywhere. The project is designed to ensure human security. When some people's drinking becomes excessive, it can have a negative impact on their interactions with others. Some people grow drunk and potentially loud and boisterous as they drink more. And because they are less inhibited, they may disregard boundaries, making people around them uncomfortable or even dangerous. This project is basically used for avoid these problems in public places by IOT technology. In this process whenever a drunken person enters through the detector placed entrance it will indicates and such new sense caused by drunken people can be avoided in public places such as theatres, school, colleges and places where family spend time. Here we are using Arduino boards through which codes can be uploaded and we are using an MQ-3 alcohol sensor and a buzzer. The alcohol sensor will sense the consumption of alcohol by a person when he enters and indicates to the buzzer and the buzzer will blow.
James, N., Aparna, C., & John, T. P, “Alcohol Detection System,” International Journal of Research in Computer andCommunication Technology,Vol 3, Issue 1, January2014.
Bhuta, P., Desai, K., &Keni, A, “Alcohol detection and vehicle controlling,” International Journal of Engineering Trends and Applications, (IJETA), 2(2), 92-97, (2015).
K. Seelam and Ch. J. Lakshmi, “An Arduino based embedded system in passenger car for road safety,” 2017 International Conference on Inventive Communication and Computational Technologies (ICICCT), Mar. 2017, doi: 10.1109/icicct.2017.7975201.
G. Gasparesc, “Driver Alcohol Detection System Based on Virtual Instrumentation,” IFAC-PapersOnLine, vol. 51, no. 6, pp. 502–507, 2018, doi: 10.1016/j.ifacol.2018.07.110.
S. Al-Youif, M. A. M. Ali, and M. N. Mohammed, “Alcohol detection for car locking system,” 2018 IEEE Symposium on Computer Applications & Industrial Electronics (ISCAIE), Apr. 2018, doi: 10.1109/iscaie.2018.8405475.
Dr. Pavan Shukla, Utkarsh Srivastava, Sridhar Singh, and Rishabh Tripathi, Rakesh Raushan Sharma, “Automatic Engine Locking System Through Alcohol Detection,” International Journal of Engineering Research and, vol. V9, no. 05, May 2020, doi: 10.17577/ijertv9is050528.
Anthony, M., Varia, R., Kapadia, A., & Mukherjee, M., “Alcohol detection system to reduce drunk driving,” International Journal of Engineering Research & Technology, 9(3), 360-365, (2021).
C. V. Vani, A. J. Vijithra, M. K. Vasan, B. Kavimani, V. K. Prasath, and J. Hariharan, “Alcohol Detection Using Automation,” ECS Transactions, vol. 107, no. 1, pp. 17563–17570, Apr. 2022, doi: 10.1149/10701.17563ecst.
Pranjali Ingalepatil, Priyanka Barhate, Bhagyashri Nemade, Vijay D. Chaudhari, “Alcohol Detection System in Vehicle Using Arduino,” International Research Journal of Engineering and Technology (IRJET), Volume: 04 Issue: 06, June 2017.
Karhale, A., Pradeep, N. K., &Anitha, S., “A Brief Review Alcohol Detection System in Vehicle Using Arduino,” Journal of Analog and Digital Devices, 8(1), 8-13, (2023).
Kumar and A. Layek, “Heat Transfer Measurement in a Rectangular Channel of Solar Air Heater With Winglet-Type Ribs Using Liquid Crystal Thermography,” Journal of Thermal Science and Engineering Applications, vol. 14, no. 4, Jul. 2021, doi: 10.1115/1.4051692.
Kumar, A. Layek, and D. Kumar, “Effect of relative roughness pitch on the performance evaluation of a solar air heater roughened with chamfered rib and groove roughness on the surface plate using CFD technique,” AIP Conference Proceedings, 2020, doi: 10.1063/5.0024246.
Kumar, A. Layek, and P. K. Mondal, “Heat Transfer Analysis of a Solar Air Heater Roughened with Chamfered Rib and Groove Roughness on the Absorber Plate Using CFD Approach,” Lecture Notes in Mechanical Engineering, pp. 1373–1384, 2020, doi: 10.1007/978-981-150124-1_121.
Rawani, A. Kumar, P. Singh, and A. K. Ansu, “Performance analysis of cylindrical parabolic solar collector with twisted tape on solar radiation,” Materials Today: Proceedings, vol. 47, pp. 3064–3067, 2021, doi: 10.1016/j.matpr.2021.05.643.
K. Das et al., “Optimum design of S-shaped diffuser by studying the effect of inlet velocity, turning angle and area ratio,” International Journal on Interactive Design and Manufacturing (IJIDeM), vol. 17, no. 5, pp. 2673–2685, Dec. 2022, doi: 10.1007/s12008-022-01132-4.
D. W. Lachenmeier, M. Neufeld, and J. Rehm, “The Impact of Unrecorded Alcohol Use on Health: What Do We Know in 2020?,” Journal of Studies on Alcohol and Drugs, vol. 82, no. 1, pp. 28–41, Jan. 2021, doi: 10.15288/jsad.2021.82.28.
Cite this article
Sri Ram S K, Kavin P, Sam Santhosh Kumar S and Amit Kumar, “An Ingenious Method for Detecting Harmful Alcohol Consumption in Restricted Areas”, Advances in Intelligent Systems and Technologies, pp. 147-152, August. 2023. doi:10.53759/aist/978-9914-9946-4-3_23
